MTA ARIES N

InquiryDownload brochure

Air-cooled liquid chillers for process and comfort cooling, with screw compressors and R290 refrigerant.

Nominal cooling capacity: 165–240 kW
Leaving water temperature: -12 °C to +25 °C
Outdoor temp. (full load): -20 °C to +48 °C
Refrigerant: R290
Compressor: Screw
Condenser / evaporator: Microchannel / brazed plate
Nominal cooling capacity: 165–240 kW
Leaving water temperature: -12 °C to +25 °C
Outdoor temp. (full load): -20 °C to +48 °C
Refrigerant: R290
Compressor: Screw
Condenser / evaporator: Microchannel / brazed plate
InquiryDownload brochure
Standardna oprema 7 · Opcije 5 · Dodatna oprema 4
  • Zračno hlajena izvedbaZračno hlajen kondenzator z visoko učinkovitimi aksialnimi ventilatorji, optimiziranimi za tiho in energetsko učinkovito delovanje.
  • Spiralni kompresorjiVeč spiralnih kompresorjev v tandem ali trio konfiguraciji, razporejenih v dva neodvisna hladilna tokokroga za visoko zanesljivost in delno obremenitev.
  • Hladilno sredstvo R290Naravno hladilno sredstvo z zelo nizkim GWP in brez vpliva na ozonski plašč, skladno z najstrožjimi okoljskimi zahtevami.
  • Spajkani ploščni uparjalnikVisoko učinkovit uparjalnik za stabilno delovanje in optimalen prenos toplote v procesnih in komfortnih aplikacijah.
  • Mikrokanalni kondenzatorAluminijasti mikrokanalni toplotni izmenjevalnik z zmanjšano količino hladilnega sredstva in izboljšano toplotno izmenjavo.
  • Elektronski ekspanzijski ventiliNatančen nadzor pretoka hladilnega sredstva za optimalno učinkovitost v vseh obratovalnih pogojih.
  • Krmilnik Trane Symbio™ 800Napreden krmilni sistem z nadzorom delovanja, alarmi, optimizacijo porabe energije in možnostjo komunikacije z nadzornimi sistemi.
ParameterASN 050ASN 060ASN 070
Nominalna hladilna moč (1) [kW]165,7206241,5
EER (2)3,473,43,4
SEER (3)4,85,075,09
SEPR HT (4)6,426,496,49
Napajanje [V / Ph / Hz]400 / 3 / 50
Vezja / Kompresorji [n° / n°]2 / 42 / 62 / 6
Glasnost (5) [dB]899192
Širina [mm]2230
Globina [mm]247524753450
Višina [mm]2525
Vgrajena masa [kg]148919841995

Outstanding energy efficiency

High efficiency across operating conditions: average EER above 3.4, SEER around 5 (comfort), and SEPR HT above 6.4 (process).

Very wide operating range

Leaving water temperature from -12 °C to +25 °C and full load operation from -20 °C to +48 °C ambient for year-round use.

2 independent refrigerant circuits

Optimized circuit with tandem/trio screw compressor configurations in two independent circuits for improved reliability and part-load performance.

Advanced heat exchange

Microchannel condenser coils and a brazed plate evaporator provide strong performance and a compact design.

Smart Symbio™ 800 control

Trane Symbio™ 800 adaptive controller for precise, intelligent system management and stable operation.

R290 – sustainable refrigerant

R290 is ozone-friendly and has an exceptionally low global warming potential.

All-in-one design and fast integration

Compact design with integrated key hydraulic and mechanical elements reduces footprint and simplifies installation; integrated hydraulic kits are also available.

Safety-first design (ATEX)

The refrigerant circuit is in a separate compartment with ATEX leak detection and ATEX extraction fans; electrical cabinet is separated and safety valves are installed on low- and high-pressure sides.

Optional partial heat recovery

Waste heat can be reused for hot-water preparation via an additional plate heat exchanger with insulation, venting, and drain.

Eurovent and ErP

Declared data with Eurovent certification and compliance with ErP ecodesign requirements.

Plastics and extrusion – process cooling

Plastics and extrusion

Stable cooling

Cooling tools, molds, and extruders for repeatable cycles, lower scrap rates, and better dimensional stability.

Food industry – process cooling

Food industry

Hygiene & reliability

Process and equipment cooling (mixing, fermentation, packaging) with support for stable production temperatures.

Pharma and chemicals – precise process cooling

Pharma and chemicals

Precise control

Temperature stability for reactions, storage, and support systems where deviations can be critical.

Machining and CNC – process cooling

Machining and CNC

Lower thermal distortion

Cooling emulsions, spindles, and process streams for better machining stability, tighter tolerances, and longer tool life.

Comfort cooling for buildings

Buildings and technical rooms

Comfort cooling

Air-cooled chillers for office buildings, hotels, and technical spaces without requiring a cooling tower.

Laboratories and R&D – stable temperature

Laboratories and R&D

Test repeatability

Reliable cooling for test benches, measurement processes, and prototypes where stable temperature is part of the specification.

Other air-cooled chiller solutions

Explore additional series and solutions available in our offer.

MTA TAURUS G

MTA – TAURUS G

Robust

Robust industrial air chillers for continuous operation in demanding environments.

Več o napravi →
MTA ARIES N

MTA – ARIES N

R290

Energy-efficient industrial chillers using natural R290 refrigerant.

Več o napravi →
MTA ARIES G

MTA – ARIES G

Efficiency

Energy-efficient cooling solutions for more demanding industrial processes.

Več o napravi →
MTA ARIES N-iASN

MTA – ARIES N iASN

iASN technology

Industrial air chillers with natural refrigerant and integrated iASN technology.

Več o napravi →
Industrial cooling

Describe your process and we will propose the right solution.

Fill in a short form and we will prepare a configuration proposal based on load profile, environment, and energy efficiency goals.

Sizing based on real operating loads
Energy consumption optimization
Supply, installation, and service
Contact form
* required fields
Your message is sent directly to our email inbox.
Call EmailView solutions
Where to find us
Directions
Pod lipami 4 · 1370 Logatec, Slovenija