MTA TAEevo Tech

Air-cooled process chillers with screw compressors—a compact solution with integrated tank and pump for reliable industrial process cooling.

Nominal cooling capacity: 8–259 kW
Power supply: 400±10% / 3-PE / 50 Hz
Refrigerant: R410A
EER: up to 2.83 (12/7 °C; 35 °C) / up to 4.50 (20/15 °C; 25 °C)
Operating mode: Cooling
Heat exchanger: Finned-coil evaporator in tank
Fan: (High-head) axial / centrifugal / EC (model dependent)
Nominal cooling capacity: 8–259 kW
Power supply: 400±10% / 3-PE / 50 Hz
Refrigerant: R410A
EER: up to 2.83 (12/7 °C; 35 °C) / up to 4.50 (20/15 °C; 25 °C)
Operating mode: Cooling
Heat exchanger: Finned-coil evaporator in tank
Fan: (High-head) axial / centrifugal / EC (model dependent)
Standardna oprema 9 · Opcije 7 · Dodatna oprema 9
  • Hladilno sredstvo R410AVisoko učinkovito hladilno sredstvo R410A zagotavlja odlične zmogljivosti in učinkovito toplotno izmenjavo pri procesnem hlajenju.
  • Hermetični scroll kompresorjiZagotavljajo visoko učinkovitost, zanesljivo delovanje in dolgo življenjsko dobo tudi pri zahtevnih industrijskih obratovalnih pogojih.
  • Uparjalnik v zalogovniku (evaporator-in-tank)Visoko učinkovit lamelni register iz bakrenih cevi in aluminijastih lamel, vgrajen neposredno v vodni zalogovnik za stabilno temperaturo in nizke toplotne izgube.
  • Zračno hlajeni kondenzatorjiPredimenzionirani kondenzatorji iz bakrenih cevi in aluminijastih lamel; zračni filter serijsko vgrajen od modela 031 dalje.
  • Aksialni ventilatorjiVentilatorji z galvaniziranimi jeklenimi lopaticami (mod. 020) ali aluminijasto/plastičnimi srpastimi lopaticami (mod. 031–1002).
  • Hidravlični zalogovnikVgrajen vodni zalogovnik (projektni tlak 6 barg) z ventili za polnjenje/praznjenje in manometrom za stabilno delovanje sistema.
  • Napredna regulacija IC208CXParametrični mikroprocesorski krmilnik omogoča natančen nadzor delovanja, diagnostiko in integracijo v nadzorne sisteme.
  • Varnostna in zaščitna opremaVključuje nadzor faz, visoko- in nizkotlačna stikala, senzor nivoja s kontrolo prevodnosti, grelec karterja in notranji hidravlični obvodni vod.
  • Zaščita električne omareStopnja zaščite IP54 (modeli 031–1002) oziroma IP44 (model 020) omogoča tudi zunanjo namestitev.
Parameter0200310510811011211612012513013513814014025026027028029021002
Nazivna hladilna moč (1) [kW]5,669,0113,0621,9726,7334,5437,8343,3248,5657,7465,1378,8787,6687,65102,27112,97132,7154,66173,71195,21
Skupna absorbirana moč (1) [kW]2,263,4558,049,6712,7314,616,4419,9921,6727,6427,863233,2138,2643,9649,2757,1365,1370,59
EER (1)2,512,622,612,732,772,712,592,632,432,662,362,832,742,642,672,572,692,712,672,77
SEPR HT (2)5,045,095,235,075,025,035,045,385,345,15,135,265,175,325,535,375,315,595,375,46
SEPR MT (3)2,742,953,183,463,373,273,313,433,673,473,313,33,293,613,993,773,633,733,693,91
Nazivna hladilna moč (4) [kW]8,112,8218,3830,0536,3647,2551,5859,266,8279,3889,11109,86122120,91141,99157,05179,46207,88231,81259,06
Skupna absorbirana moč (4) [kW]1,92,964,347,238,5811,3812,9514,8417,9219,1124,4524,4428,8930,1634,4139,1943,0550,4357,6262,73
EER (4)4,264,334,244,154,234,153,983,993,734,153,644,54,224,014,134,014,174,124,024,13
Napajanje [V / Ph / Hz]400±10% / 3-PE / 50
Zvočna moč 50 Hz (5) [dB(A)]80,481,181,181,682,182,183,084,384,386,086,088,389,789,589,589,590,290,691,792,8
Širina [mm]560660660761761761761866866866866115011501255125512551250125012501250
Globina [mm]12841315131518621862186218622250225022502250279027903298329832983535353546554655
Višina [mm]7951373137314371437143714372054205420542054209020902119211921192151215121552155
Obratovalna masa (6) [kg]19931432446262463564992496610181028136614191666168217262077211428392936
Volumen zalogovnika [l]60115115140255255255350350350350410410500500500678678950950
Vodna priključka uparjalnika [Rp / DN]3/4"1"1"1 1/2"1 1/2"1 1/2"1 1/2"2"2"2"2"2 1/2"2 1/2"2 1/2"2 1/2"2 1/2"3"3"DN100DN100

Evaporator in tank

A dedicated process-cooling design enables high flows with low pressure losses and reliable operation even with contaminated process fluids.

High efficiency with screw compressors

Hermetically sealed screw compressors ensure high efficiency, strong performance, and noticeable energy savings.

Wide operating range

Extended limits: inlet water temperature up to +35 °C, outlet temperature down to -10 °C, ambient temperature from -5 °C to +46 °C.

ErP compliance (SEPR HT & SEPR MT, Tier 2)

All models already meet ErP requirements for SEPR HT (Tier 2 from 01/01/2021) and SEPR MT (Tier 2 from 02/07/2018).

R410A refrigerant for high performance

R410A supports higher performance thanks to strong thermal conductivity and efficient heat transfer.

Oversized hydraulic tank

A large hydraulic tank is integrated as standard to stabilize the system during sudden load changes.

Suitable for outdoor installation

IP54 / IP44 electrical protection enables reliable operation and installation outdoors.

Application-specific customization

A broad range of options and kits allows precise configuration for specific process and user requirements.

For open or pressurized hydraulic systems

The refrigerant circuit is suitable for atmospheric and pressurized hydraulic systems (up to 6 barg).

Comprehensive safety package

Includes phase monitoring, pressure switches, antifreeze sensors, level sensors, crankcase heaters, and an internal hydraulic bypass for safe and stable operation.

Process cooling in the plastics industry

Plastics industry

Process cooling

Precise and reliable cooling of tools, extruders, and injection molding machines ensures consistent product quality and shorter production cycles.

Process cooling in the automotive industry

Automotive industry

High reliability

Stable process cooling for production lines, test stations, and machining processes in the automotive sector.

Process cooling in the chemical and pharmaceutical industry

Chemical and pharmaceutical industry

Temperature stability

Reliable temperature control of process fluids in chemical and pharmaceutical operations where precision and safety are critical.

Process cooling in the food industry

Food industry

Clean operation

Cooling of food and beverage processes to ensure quality, repeatability, and compliance with hygiene requirements.

Cooling of laser systems

Laser systems

Precision cooling

Precise cooling of laser sources and optics supports stable operation, longer component life, and high machining quality.

Process cooling of machine tools

Machine tools

Reliability

Efficient cooling of spindles, emulsions, and hydraulic systems improves machining precision and machine reliability.

Cooling processes in winemaking

Winemaking

Wine cooling

Precise temperature management during fermentation and storage to preserve quality and deliver repeatable results.

Industrial cooling

Describe your process and we will propose the right solution.

Fill in a short form and we will prepare a configuration proposal based on load profile, environment, and energy efficiency goals.

Sizing based on real operating loads
Energy consumption optimization
Supply, installation, and service
Contact form
* required fields
Your message is sent directly to our email inbox.
Where to find us
Directions
Pod lipami 4 · 1370 Logatec, Slovenija