MTA TAEevo Tech MINI

A new generation of compact liquid chillers for process cooling—reliability, minimal footprint, and high energy efficiency in the 1.8–4.4 kW range.

Nominal cooling capacity: 1.8–4.4 kW
Power supply: 230 V / 1 phase / 50–60 Hz (M03); 230 V / 1 phase / 50 Hz (M05–M10)
Refrigerant: R134a (M03); R410A (M05–M10)
EER: up to 4.47 (depending on operating conditions)
Operating mode: Cooling
Heat exchanger: Finned-coil evaporator in tank
Fan: Axial fans
Nominal cooling capacity: 1.8–4.4 kW
Power supply: 230 V / 1 phase / 50–60 Hz (M03); 230 V / 1 phase / 50 Hz (M05–M10)
Refrigerant: R134a (M03); R410A (M05–M10)
EER: up to 4.47 (depending on operating conditions)
Operating mode: Cooling
Heat exchanger: Finned-coil evaporator in tank
Fan: Axial fans
Standardna oprema 12 · Opcije 7 · Dodatna oprema 5
  • Hladilna sredstva brez ODPHladilna sredstva brez vpliva na ozonski plašč (ODP=0): R134a za model M03 ter R410A za modele M05–M10.
  • Hermetični rotacijski kompresorjiZanesljivi hermetični rotacijski kompresorji za stabilno in učinkovito delovanje v industrijskih pogojih.
  • Uparjalnik v rezervoarjuVisoko učinkovit uparjalnik z lamelno tuljavo, nameščen v rezervoarju, z bakrenimi cevmi in aluminijastimi lamelami za optimalen prenos toplote.
  • Vodni rezervoarPolietilenski vodni rezervoar z izpustnim ventilom, priključki za polnjenje in preliv ter vizualnim indikatorjem nivoja.
  • Cirkulacijska črpalka P3Nekorozijska periferalna črpalka P3 (3 bar), vgrajena v modele M03–M10 za zanesljivo kroženje procesne tekočine.
  • Aksialni ventilatorjiAksialni ventilatorji s srpastimi lopaticami iz pocinkanega jekla, opremljeni s termično zaščito in varnostno mrežo.
  • Zračno hlajen kondenzatorVisoko učinkovit zračno hlajen kondenzator z bakrenimi cevmi in aluminijastimi lamelami, zaščiten z metalnimi zračnimi filtri.
  • Nekorozijski hidravlični krogHidravlični krog iz nekorozijskih materialov z manometrom (0–6 bar) in kalibriranim hidravličnim by-passom.
  • Podpora za mešanice glikolaMožnost uporabe mešanic vode in etilen- ali propilen-glikola do 30 %.
  • Varnostni tlačni elementiVisokotlačno stikalo z ročnim resetom (M05–M10) ter tlačni priključki za preverjanje in vzdrževanje.
  • Digitalni regulator XR60CXDigitalni mikroprocesorski krmilnik XR60CX z integriranim prikazom in signalnimi lučmi (zeleno/rdeča – M08–M10).
  • Napajanje in zaščitaNapajanje: 230 V / 1 faza / 50–60 Hz (M03) oziroma 230 V / 1 faza / 50 Hz (M05–M10), stopnja zaščite IP33.
Parameter03050810
Nazivna hladilna moč (1) [kW]1,22 / 1,23 (50/60 Hz)1,842,332,98
Skupna absorbirana moč (1) [kW]0,46 / 0,55 (50/60 Hz)0,700,891,17
Nazivna moč črpalke P3 (opcijsko, 3 bar) [kW]0,180,370,370,37
EER (1) [-]2,67 / 2,23 (50/60 Hz)2,652,612,55
Nazivna hladilna moč (2) [kW]1,76 / 1,80 (50/60 Hz)2,703,434,43
Skupna absorbirana moč (2) [kW]0,40 / 0,50 (50/60 Hz)0,600,771,01
EER (2) [-]4,38 / 3,59 (50/60 Hz)4,474,474,38
SEPR HT (3) [-]5,055,105,125,00
Napajanje [V / Ph / Hz]230 ±10% / 1 - PE / 50–60230 ±10% / 1 - PE / 50230 ±10% / 1 - PE / 50230 ±10% / 1 - PE / 50
Raven zvočne moči (4) [dB(A)]74 / 75 (50/60 Hz)757575
Širina [mm]486
Globina [mm]660
Višina [mm]623623876876
Delovna masa brez črpalke [kg]63659194
Delovna masa s črpalko P3 (3 bar) [kg]687197100
Volumen rezervoarja [l]15152222
Priključki vode uparjalnika [Rp]1/2"1/2"1/2"1/2"

Evaporator in tank

A unique evaporator-in-tank design optimized for process cooling enables high water flow with low pressure drops and reliable operation even in demanding applications.

Corrosion-resistant hydraulic circuit

A non-corrosive hydraulic circuit allows use with fluids aggressive to carbon steel while ensuring maximum process fluid cleanliness and quality.

ErP compliance (SEPR HT)

All TAEevo Tech MINI models already meet ErP requirements for SEPR HT (Tier 2), providing high energy efficiency and lower environmental impact.

Compact industrial design

Compact dimensions enable quick installation, while a robust frame with lifting points supports safe on-site handling.

Simplified maintenance

A clear hydraulic layout, straightforward refrigerant circuit, and labeled wiring enable fast checks and servicing—even during operation.

Quick air-filter access

The condenser air filter is designed for fast removal, significantly simplifying routine cleaning and maintenance.

Extended operating conditions

Operation is supported with process-fluid temperatures from 0 °C to +30 °C and ambient temperatures up to +45 °C for high application flexibility.

Adaptable to multiple applications

Units are suitable for water and ethylene- or propylene-glycol mixtures (up to 30%) across a wide range of industrial processes.

Process cooling in the plastics industry

Plastics

Process cooling

Reliable process cooling for plastic injection molding, extrusion, and other operations where stable temperature and repeatability are critical.

Cooling in the chemical and pharmaceutical industry

Chemical & pharmaceutical industry

High reliability

Compact chillers for cooling processes, laboratory equipment, and production lines where reliability, fluid cleanliness, and precise temperature control are essential.

Process cooling in the food industry

Food industry

Temperature stability

Stable process-water cooling for food and beverage production, supporting process performance and final product quality.

Cooling of laser systems

Laser systems

Precision cooling

Accurate temperature control for laser sources and optical systems where stable operating conditions are required for reliable performance and long service life.

Cooling of machine tools

Machine tools

Industrial processes

Cooling of cutting fluids, spindles, and machining processes for higher precision, process stability, and repeatability.

Process cooling in winemaking

Winemaking

Process control

Controlled temperature during fermentation and wine stabilization, where reliable process cooling is key to quality and repeatable final results.

Industrial cooling

Describe your process and we will propose the right solution.

Fill in a short form and we will prepare a configuration proposal based on load profile, environment, and energy efficiency goals.

Sizing based on real operating loads
Energy consumption optimization
Supply, installation, and service
Contact form
* required fields
Your message is sent directly to our email inbox.
Where to find us
Directions
Pod lipami 4 · 1370 Logatec, Slovenija