Mechanics, electrics and controls
Our technicians understand mechanics, wiring diagrams, variable speed drives and controllers – so they find faults that are not obvious at first sight.
- Home
- Service
KOMP-R service
Service carried out by specialists, not just technicians
Our service engineers have factory training from manufacturers and certificates for work on pressure equipment and refrigerants. We service compressors and equipment of all major brands, including those we do not sell.
- Factory-trained technicians
- Pressure equipment and F-gas certificates
- All brands serviced
- Genuine spare parts for all our equipment
Team expertise
Know-how you will not find in the manual
A modern compressor combines mechanics, electronics and control. Our technicians know all three – and understand how each machine affects your whole compressed air system.
Factory training
Regular training at the training centres of the manufacturers we represent: CompAir, Ingersoll Rand, Hydrovane, MTA, Elmo Rietschle, INMATEC and CS Instruments.
System view
We do not just change a filter. We check pressure, dew point, leaks and load, and tell you where your system is losing energy.
Continuous learning
New generations of compressors, controllers and refrigerants require up-to-date knowledge. That is why we renew our training regularly.
Certificates and authorisations
Authorised and certified for demanding work
Some work may only be carried out by trained and certified personnel. Our technicians hold the qualifications required by manufacturers and legislation.
Manufacturer-authorised service
Authorised service partner for CompAir, Champion, Hydrovane, Ingersoll Rand and the other brands we supply – your factory warranty stays valid.
F-gas certificate
Work on the refrigerant circuits of dryers and industrial chillers in line with the EU regulation on fluorinated greenhouse gases.
Pressure equipment
Qualified to maintain and test pressure vessels and pressurised equipment in line with pressure equipment regulations.
Safe working
Trained for safe work on electrical equipment and in industrial environments, including your site's internal safety rules.
On request, we send copies of our certificates and authorisations together with the quotation.
All brands
We also service equipment we do not sell
It does not matter who supplied your compressor. With the know-how and tools for all major manufacturers, we take over the service of your existing equipment – one partner for the entire compressor room.
What we service
- Screw compressors
- Piston compressors
- Rotary vane compressors
- Oil-free compressors
- High-pressure compressors
- Refrigeration and desiccant dryers
- Filters and condensate drains
- Vacuum pumps and blowers
- Industrial chillers
- Nitrogen and oxygen generators
- Compressed air piping
Brands such as
- Atlas Copco
- Kaeser
- Boge
- Almig
- Ceccato
- Abac
- Fini
- Mattei
- Sullair
- Worthington
- Gardner Denver
- Kaishan
We supply genuine spare parts for all equipment in our range. For equipment of other brands we use genuine or equivalent-quality replacement parts and oils.
Service offering
From routine maintenance to complete overhauls
We plan service according to manufacturer intervals and actual running hours, so breakdowns do not happen in the first place.
Preventive maintenance
Oil, filter and separator changes at the right intervals, inspection and adjustment of the machine.
Repairs and diagnostics
Fault finding on mechanics, electronics and controllers, clearing alarms and stoppages.
Overhauls
Screw element rebuilds, bearing and seal replacement, motor and valve overhauls.
Installation and commissioning
Positioning, connection and first start-up of new equipment, including control set-up.
Emergency call-outs
When production stops, we respond with priority on site or provide a rental compressor.
Service contracts
Fixed costs, planned visits and extended warranty, e.g. with the CompAir Assure programme.
Spare parts and oils
Supply of genuine spare parts for all equipment in our range. Stock of consumables, genuine oils and service kits for fast turnaround.
Remote monitoring
Monitoring via iConn – warnings before a failure and service at the right time.
How it works
Five steps to reliable operation
Request
Call us or send a request with the brand, model and a description of the issue.
Diagnosis
A technician assesses the condition remotely or on site.
Quotation
You receive a clear quote for parts and labour, with no surprises.
Execution
We carry out the service at the agreed time, outside production hours if needed.
Report
A service report with the work done and recommendations for the future.
iConn provides continuous monitoring of your compressors and compressor room. The system collects key operating data such as pressure, load, temperature and energy consumption, so deviations are recognised quickly and operation can be optimised.
Our technicians see early warnings and arrive before production stops.
Measurement and analysis
Need consumption, leak or air quality measurements?
Flow, pressure, dew point and leak measurements and energy audits of your compressor room are now on the measuring devices page.
FAQ
Questions about service
Do you service compressors of other brands?
Yes. We service compressors and equipment of all major manufacturers, including brands we do not sell, such as Atlas Copco, Kaeser, Boge or Almig. We use genuine or equivalent-quality parts.
How often does a compressor need servicing?
It depends on the type and running hours. Screw compressors are typically serviced every 2,000 to 4,000 operating hours or at least once a year. We set the exact interval according to the manufacturer's instructions.
Does the warranty remain valid if you carry out the service?
For the brands we supply we are an authorised service partner, so the factory warranty remains valid and can be extended with a service contract.
What should I do if a breakdown stops production?
Call our service line on +386 (0)59-936-464. Emergency call-outs are handled with priority. If you do not have your own backup compressor, we can offer you a rental compressor for the duration of the repair.
Where do you provide service?
Throughout Slovenia and in the markets of the former Yugoslavia, on the customer's site.
Service request
Need a service, inspection or urgent intervention?
Tell us the brand and model of your equipment and the problem – whatever the manufacturer. A technician will call you back as soon as possible.
Preventive and corrective maintenance
Fault diagnosis and performance optimisation
All brands serviced, spare parts and oils