Robust industrial design
Designed for long-lasting, reliable operation even in the most demanding conditions. High-quality materials, protective treatments and a solid construction ensure a long service life.
MTA CoolPro
Aftercooler for compressed air and gases in an air-cooled or water-cooled version.
| Versions: Air-cooled and water-cooled |
| Flow rate: 0.6–640 m³/min |
| Max. pressure: up to 250 bar(g) |
| Max. temperature: up to 200 °C |
| Versions: Air-cooled and water-cooled |
| Flow rate: 0.6–640 m³/min |
| Max. pressure: up to 250 bar(g) |
| Max. temperature: up to 200 °C |
- VersionsThe CoolPro series is available in three basic versions: WF as a water-cooled version with a fixed tube bundle, WE as a water-cooled version with a removable tube bundle, and AF as an air-cooled version.
- Heat exchangerHeat exchange coil with copper tubes and aluminum fins for highly efficient heat transfer and optimum cooling.
- FanA highly efficient, permanently lubricated fan with a low noise level for reliable, quiet operation.
- ConstructionA robust enclosure of galvanized and painted sheet metal with protective grilles for safe use in industrial environments.
- Condensate separatorBuilt-in centrifugal separator for efficient separation of condensate from compressed air.
- Power SupplyElectrical supply: 230V ±10% / 1Ph / 50 Hz (smaller models) or 400V ±10% / 3Ph / 50 Hz (larger models).
- Operating conditionsMaximum operating pressure of 16 bar(g) and a compressed air inlet temperature of up to 200 °C.
| Parameter | WF015 | WF027 | WF042 | WF074 | WF105 | WF125 | WF165 | WF225 | WF270 | WF350 | WF450 | WF570 | WF800 | WF1030 | WF1250 | WF1800 | WF2500 | WF3800 | WF5200 | WF6400 | WE074 | WE105 | WE125 | WE165 | WE225 | WE270 | WE350 | WE450 | WE570 | WE800 | WE1030 | WE1250 | WE1800 | WE2500 | WE3800 | WE5200 | WE6400 | AF007 | AF013 | AF025 | AF037 | AF055 | AF086 | AF121 | AF161 | AF201 | AF251 | AF381 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nominal Flow [m³/min] | 1,5 | 2,7 | 4,2 | 7,4 | 10,5 | 12,5 | 16,5 | 22,5 | 27,0 | 35,0 | 45,0 | 57,0 | 80,0 | 103,0 | 125,0 | 180,0 | 250,0 | 380,0 | 520,0 | 640,0 | 7,4 | 10,5 | 12,5 | 16,5 | 22,5 | 27,0 | 35,0 | 45,0 | 57,0 | 80,0 | 103,0 | 125,0 | 180,0 | 250,0 | 380,0 | 520,0 | 640,0 | 0,6 | 1,2 | 2,4 | 3,6 | 5,4 | 8,5 | 12,0 | 16,0 | 20,0 | 27,0 | 39,0 |
| Nominal Flow [m³/h] | 90 | 162 | 252 | 445 | 630 | 750 | 990 | 1.350 | 1.620 | 2.100 | 2.700 | 3.420 | 4.800 | 6.180 | 7.500 | 10.800 | 15.000 | 22.800 | 31.200 | 38.400 | 445 | 630 | 750 | 990 | 1.350 | 1.620 | 2.100 | 2.700 | 3.420 | 4.800 | 6.180 | 7.500 | 10.800 | 15.000 | 22.800 | 31.200 | 38.400 | 36 | 72 | 144 | 216 | 324 | 510 | 720 | 960 | 1.200 | 1.620 | 2.340 |
| Matching Separator | AS035 | AS080 | AS080 | MS105 | MS105 | MS165 | MS165 | MS270 | MS270 | MS450 | MS450 | MS800 | MS800 | MS1250 | MS1250 | MS1800 | MS3800 | MS3800 | MS6400 | MS6400 | MS105 | MS105 | MS165 | MS165 | MS270 | MS270 | MS450 | MS450 | MS800 | MS800 | MS1250 | MS1250 | MS1800 | MS3800 | MS3800 | MS6400 | MS6400 | AS035 | AS035 | MS042 | MS042 | MS105 | MS105 | MS165 | MS165 | MS165 | MS450 | MS450 |
| Air/Gas Connection without Separator | 1" | 1 1/2" | 1 1/2" | 2" | 2" | 2 1/2" | 2 1/2" | DN80 | DN80 | DN125 | DN125 | DN150 | DN200 | DN200 | DN250 | DN300 | DN350 | DN450 | DN500 | DN600 | 2" | 2" | 2 1/2" | 2 1/2" | DN80 | DN80 | DN125 | DN125 | DN150 | DN200 | DN200 | DN250 | DN300 | DN350 | DN450 | DN500 | DN600 | 3/4" | 3/4" | 1 1/4" | 1 1/4" | 2" | 2" | 2 1/2" | 2 1/2" | 2 1/2" | DN125 | DN150 |
| Outlet Connection with Separator | 1/2" | 1" | 1" | 2" | 2" | 2 1/2" | 2 1/2" | DN80 | DN80 | DN125 | DN125 | DN150 | DN150 | DN200 | DN200 | DN250 | DN300 | DN300 | DN400 | DN400 | 1 1/2" | 2" | 2 1/2" | 2 1/2" | DN80 | DN80 | DN125 | DN125 | DN150 | DN150 | DN200 | DN200 | DN250 | DN300 | DN300 | DN400 | DN400 | 1/2" | 1/2" | 1 1/4" | 1 1/4" | 2" | 2" | 2 1/2" | 2 1/2" | 2 1/2" | DN125 | DN125 |
| Water Connection | 3/8" | 1/2" | 1/2" | 3/4" | 3/4" | 1" | 1" | 1" | 1" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 2" | DN65 | DN80 | DN100 | DN100 | 3/4" | 3/4" | 1" | 1" | 1" | 1" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 1 1/4" | 2" | DN65 | DN80 | DN100 | DN100 | — | — | — | — | — | — | — | — | — | — | — |
| Condensate Outlet | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1" | 1" | 1" | 1" | 1" | 1" | 1" | 1" | 2" | 2" | 2" | 2" | 2" | 1" | 1" | 1/2" | 1/2" | 1" | 1" | 1" | 1" | 1" | 1" | 1" | 1" | 2" | 2" | 2" | 2" | 2" | 1" | 1" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1/2" | 1" | 1" | 1" | 1" | 1" |
| Max. Operating Pressure [bar(g)] | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 10 | 10 | 10 | 10 | 10 | 10 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 10 | 10 | 10 | 10 | 10 | 10 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 10 |
| Max. Media Temperature [°C] | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
Benefits
Flexible configurations
A wide range of materials, versions and configurations for air or gas allows full adaptation to the specific requirements of the application, including different pressures, temperatures and standards.
High cooling efficiency
Optimally dimensioned heat exchangers and finned tubes increase cooling efficiency and enable a reliable reduction of the compressed air or gas temperature.
Efficient condensate removal
In combination with separators it reaches almost 100% condensate separation efficiency at low pressure drops, which improves air quality and protects the system.
Complete system solution
Matching separators and condensate drains (mechanical, electronic, zero-loss) are available, enabling full integration and reliable operation of the entire system.
Advanced technology and experience
More than 30 years of experience and advanced engineering ensure high quality, precise manufacturing and reliable operation in industrial applications.
Adaptation to specific applications
The solutions are suitable for a wide range of gases and industries – from compressors to process applications – with the option of full adaptation to the requirements of the process.
Compressor Systems
Compressed AirCooling of compressed air for efficient condensate removal, protection of dryers and improved air quality in industrial systems.
Process industry
Technical gasesCooling of various technical gases (O2, N2, CO2, CH4, Ar) in demanding processes where a stable temperature and reliable operation are essential.
Chemical Industry
High demandsUsed in chemical processes that require resistant materials, high pressures and flexible configurations for different gases and media.
Energy
System coolingCooling of air and gases in energy systems, turbines and distribution, where reliability and continuous operation are essential.
Transport and logistics
Industrial useUsed in the rail, shipbuilding and transport sectors for cooling systems and ensuring stable operation of equipment.
Plastics and glass
Production ProcessesCooling in plastics processing (PET/PEN) and glass processing, where precise temperature control is required for a high-quality end product.
Air treatment
Describe your compressed air system and we will propose the right solution.
Fill in a short form and we will prepare an optimal solution for cooling, drying, filtration, and condensate removal.
Improved air quality
Condensate removal optimization
Complete system solution
Where to find us
DirectionsPod lipami 4 · 1370 Logatec, Slovenija
Similar devices
Explore other air treatment solutions.
MTA CoolPro
AftercoolerAftercooler for compressed air and gases in an air-cooled or water-cooled version. It is designed to efficiently reduce the temperature of the medium after compression, separate condensate and make system operation more reliable.
More about the device→
MTA DE ETM
Refrigeration air dryerCycling refrigeration dryer for compressed air with heat accumulator technology for energy-efficient drying at higher flow rates. It provides a stable dew point, low pressure drops and low operating costs.
More about the device→
MTA DE-X
Refrigeration air dryerRefrigeration air dryer for efficient compressed air treatment with low pressure drops and a stable dew point. The patented X-MODULE heat exchanger and the compact design ensure reliable operation in demanding industrial conditions.
More about the device→
MTA ETM DM
Modular air dryerModular system for drying compressed air with advanced thermal mass technology for high energy efficiency. Several modules can be connected in a MASTER/SLAVE configuration to match capacity to different loads.
More about the device→
MTA HPDry
High-pressure dryerHigh-pressure refrigeration dryer for compressed air up to 50 barg with energy-efficient operation and a stable pressure dew point. It is suitable for high-pressure systems where reliability, energy savings and stable air drying are important.
More about the device→