Low emission zone

CompAir portable compressors

Mobile compressors for construction sites and field work

Turning power into efficiency.

Reliable compressed air wherever you need it – from a 165 kg service compressor to a TurboScrew unit delivering 27 m³/min. Stage V diesel engines or the emission-free electric Elec50.

free air delivery
1–27m³/min
working pressure
5–24bar
engine output
15.5–224kW
in 6 ranges + Elec50
41types
Model finder

Which mobile compressor do you need?

Choose the application, set pressure and flow – the chart shows all 41 types at once and highlights those that meet your requirements.

1. What will you use it for?

5 bar24 bar
1 m³/min27 m³/min

Drive

Recommended AirPlus equipment

Aftercoolernot needed
Microfilternot needed
Tool oilerrecommended
5710121417212412357.510152027Working pressure [bar]Flow [m³/min]C14-12 · 1 m³/min · 7–12 barC14-10 · 1.2 m³/min · 7–10 barC14 · 1.4 m³/min · 7–7 barC15-14 · 1.5 m³/min · 5–13.5 barC20 · 2 m³/min · 5–7 barC20-12 · 1.8 m³/min · 5–12 barC25 · 2.5 m³/min · 5–7 barC25-10 · 2.3 m³/min · 5–10 barC30 · 2.9 m³/min · 5–6 barC35-10 · 3.5 m³/min · 5–10 barC38 · 3.8 m³/min · 5–7 barC42 · 4.2 m³/min · 5–7 barC50 · 5 m³/min · 5–7 barC30-12 FPM · 3–3.8 m³/min · 5–12 barC35-14 FPM · 3.5–4 m³/min · 5–14 barC38-10 FPM · 3.8–4.2 m³/min · 5–10 barC42-10 FPM · 4.2–5 m³/min · 5–10 barC55-14 · 5.5–6.5 m³/min · 5–14 barC60-12 · 6–7.6 m³/min · 5–12 barC65-10 · 6.5–7.6 m³/min · 5–10 barC65 HS · 6.5 m³/min · 5–7 barC76 · 7.6 m³/min · 5–7 barC85-14 · 8.6–10.8 m³/min · 5–14 barC95-12 · 9.4–10.8 m³/min · 5–12 barC100-10 · 10–10.8 m³/min · 5–10 barC110-9 · 10.8 m³/min · 5–8.6 barC105-14 · 10.5–13.3 m³/min · 5–14 barC115-12 · 11.5–13.3 m³/min · 5–12 barC130-10 · 13–13.3 m³/min · 5–10 barC140-9 · 13.3 m³/min · 5–8.6 barC200TS-14 · 20 m³/min · 6–14 barC210TS-12 · 21 m³/min · 6–12 barC220TS-10 · 22 m³/min · 6–10 barC230TS-9 · 23 m³/min · 6–8.6 barC240TS-14 · 24 m³/min · 6–14 barC250TS-12 · 25 m³/min · 6–12 barC260TS-10 · 26 m³/min · 6–10 barC270TS-9 · 27 m³/min · 6–8.6 barC200TS-24 · 20 m³/min · 14–24 barC210TS-21 · 21 m³/min · 14–21 barC230TS-17 · 23 m³/min · 14–17 barElec50 · 3.5–5 m³/min · 5–12 barYour requirement
DLT 0101DLT 0207DLT 0409-R1DLT 0705-R1DLT 1304DLT 2703 TurboScrewElec50
Range

From 165 kg to 27 m³/min

Six ranges of diesel compressors plus the electric Elec50. Each range is built for a different job – choose by the tools you run.

Manually movableCompAir DLT 0101

DLT 0101

C14-12 – C14

Compact compressor with only 165 kg operating weight. A powerful alternative to electric tools for repair and installation work.

Flow
1–1.4 m³/min
Pressure
7–12 bar
Power
15.5 kW
Weight
165 kg
Engine
Honda GX 630
Noise (7 m)
69 dB(A)
Fuel tank
20 l
Details and technical data →
For every siteCompAir DLT 0207

DLT 0207

C15-14 – C30

Mechanically controlled Yanmar Stage V engines need no particulate filter. Lower noise; oil thermostatic valve as standard.

Flow
1.5–2.9 m³/min
Pressure
5–13.5 bar
Power
16.5 / 18.9 kW
Weight
600 – 636 kg
Engine
Yanmar 3TNV76
Noise (7 m)
69 dB(A)
Fuel tank
32 l
Details and technical data →
Urban & rentalCompAir DLT 0409-R1

DLT 0409-R1

C30-12 FPM – C50

Quiet, water-cooled 4-cylinder Yanmar with particulate filter. Under 750 kg, available with generator, aftercooler and FPM.

Flow
3–5 m³/min
Pressure
5–14 bar
Power
35.0 kW
Weight
765 – 880 kg
Engine
Yanmar 4TNV88C
Noise (7 m)
69 dB(A)
Fuel tank
60 l
Details and technical data →
10 % less fuelCompAir DLT 0705-R1

DLT 0705-R1

C55-14 – C76

Up to 14 bar, FPM and particulate filter. Tool storage under the bonnet for two hammers or other air tools.

Flow
5.5–7.6 m³/min
Pressure
5–14 bar
Power
53.7 kW
Weight
1240 kg
Engine
Yanmar 4TNV98CT
Noise (7 m)
69 dB(A)
Fuel tank
140 l
Details and technical data →
Roads & infrastructureCompAir DLT 1304

DLT 1304

C85-14 – C140-9

Deutz TCD 4.1 with electronic injection, 24 V start even at low temperatures and automatic safety shutdowns.

Flow
8.6–13.3 m³/min
Pressure
5–14 bar
Power
90 / 105 kW
Weight
2075 – 2160 kg
Engine
Deutz TCD 4.1 L4
Noise (7 m)
70 dB(A)
Fuel tank
175 l
Details and technical data →
TurboScrew up to 24 barCompAir DLT 2703 TurboScrew

DLT 2703 TurboScrew

C200TS-24 – C270TS-9

Patented bi-turbo technology, Cummins QSB 6.7 and an SCRT® system that removes virtually all soot and nitrogen oxides.

Flow
20–27 m³/min
Pressure
6–24 bar
Power
180 / 224 kW
Weight
3300 – 3360 kg
Engine
Cummins QSB 6.7 + SCRT
Noise (7 m)
71 dB(A)
Fuel tank
350 l
Details and technical data →
Zero emissionsCompAir Elec50

Elec50

Elec50

Electric drive with regulated speed. For tunnels, indoor work and noise-restricted zones.

Flow
3.5–5 m³/min
Pressure
5–12 bar
Power
30 kW
Weight
725 – 781 kg
Engine
IP55 (IE3), 400 V / 50 Hz, 63 A CEE
Noise (7 m)
69 dB(A)
Details and technical data →

Not sure which one to pick?

Tell us which tools you run and where you work. We will suggest the right model and options and prepare an offer to buy or rent.

Send an enquiry →
Zero emissions · electric driven

Elec50Construction of tomorrow

The Elec50 combines the ruggedness of CompAir portables with a quiet, economical, emission-free electric drive. Wherever mains power is available, just plug in and work.

46 %
lower energy costs
36 %
lower maintenance and service costs

compared to a diesel equivalent

at 12 / up to 7 bar
3.5 / 5.0m³/min
regulated speed
30kW
towable by passenger car
< 750kg
plug & play on the grid
16–63A
CompAir Elec50
Tunnels, excavation pits and buildings
Tunnels, excavation pits and buildings

Typical applications

  • Breakers and displacement hammers
  • Blow-out work and drilling
  • Spray painting
  • Sand and ice blasting
  • Tunnels, excavation pits and buildings
  • Environmental and noise protection zones

Elec50

  • DELCOS controller and iConn GPS tracking
  • FPM – Flexible Power Management
  • Aftercooler as standard
  • Health protection for employees
More about Elec50 →
DLT 2703 range

More efficiency with TurboScrew

The patented TurboScrew system is CompAir's active contribution to energy saving and environmental protection: excellent fuel economy, low weight and performance according to Regulation (EU) 2016/1628 Stage V.

C200TS – C270TS range →
CompAir C200TS-24 TurboScrew
  1. Turbo diesel engine

    The screw compressor is driven by a turbocharged Cummins QSB 6.7.

  2. Extra turbocharger

    An additional turbocharger pre-compresses the air before it enters the airend.

  3. CompAir airend

    The airend compresses the pre-compressed air up to 24 bar – with less energy per m³.

  4. SCRT® cleaning

    Selective catalytic reduction removes virtually all soot and NOx from the exhaust.

flow
20–27m³/min
HP versions
up to 24bar
Cummins QSB 6.7
224kW
fuel tank
350l
FPM – Flexible Power Management

Set the pressure, get more air

On a standard compressor the flow is tied to the rated pressure. With FPM you set the working pressure your tool really needs and get a higher flow – one compressor replaces several types.

< 7 bar8–10 bar10–14 bar567891011121314152345barm³/minC35-10C38C4254.2
C42-10 FPM – with FPMstandard types without FPM

Which pressure for which job

< 7 barPneumatic tools
8–10 barBlasting
10–14 barDrilling, ice blasting, fibre-optic cable blowing

FPM is optional on the DLT 0409-R1 range and fitted on DLT 0705-R1 and DLT 1304 types.

AirPlus

AirPlus – The right options for every application

We equip the compressor exactly for your job – from air quality to a generator and your company colours. Options can be combined.

Built-in aftercooler

Built-in aftercooler

With automatic water separation. An extra heat exchanger uses compressor oil to reheat the air and protect tools from freezing.

Microfilter combination

Microfilter combination

Air treatment to ISO 8573-1 including ZTV-ING with residual oil content < 0.01 ppm.

Hose reel

Hose reel

20 m light self-supporting hose – protects the hose and enables fast tool set-up.

Custom colour and labelling

Custom colour and labelling

Distinctive site identity and easier tracing in the event of loss or theft.

Integrated generator

7 kVA (110 V), 9 kVA or 15 kVA (230/400 V) – electronically controlled synchronous generator.

Tool oiler

Optimised lubrication of pneumatic tools straight from the compressor.

Oil thermostatic valve

Safe operation at low ambient temperatures, tools do not freeze. Standard from C15-14.

Safety and environment

Spark arrestor, Chalwyn valve, bunded bottom box, remote start/stop and cold start kit.

Air treatment by application

ApplicationAftercoolerMicrofilterTool oiler
Breakers and pneumatic tools––+
Sand blasting+✓–
Dry-ice blasting+✓–
Drilling✓–+
Spray painting++–
Soil displacement moles––+
Fibre-optic cable blowing+✓–
Concrete spraying+✓–
+ recommended✓ depending on manufacturer and application– not needed

Compressed air tools

We complete the compressor with breakers, chipping hammers, rockdrills, chisels, hoses and lubricators – including vibration-damped versions.

Renewable fuel

HVO – up to 90 % less CO₂, no modifications

Hydrotreated vegetable oil (HVO) is a renewable diesel alternative. Chemically it is very similar to fossil diesel, so CompAir portable compressors run on it without engine modifications.

90 %
less greenhouse gas
70–90
cetane number (diesel 48–55)
< 5 ppm
sulphur
EN 15940
paraffinic fuel standard
  • Better cold-weather starting and operation
  • Longer storage life, fewer deposits
  • Less particulates and NOx – cleaner air on site
  • Lower maintenance costs
HVO – up to 90 % less CO₂, no modifications
Approved by the engine manufacturersCumminsYanmarDeutz

Due to the lower density of HVO, available engine power is reduced by 1–3 %.

KOMP-R service

Less downtime, longer service life

CompAir Original Service Kits contain all genuine parts for preventive maintenance of each model. Order once, service faster.

  • All parts in one package
  • Simple ordering
  • Lower costs
  • Avoid downtime
  • Longer service life
  • Meet current standards
5

Mobile 5

up to 5 years warranty to protect your investment

Compressors

Tell us your requirements and we will propose the right compressor.

Fill in a short form and we will prepare a configuration proposal.

Sizing based on actual consumption
Energy optimization
Installation and service
Contact form
* required fields
Your message is sent directly to our email inbox.
Where to find us
Directions
Pod lipami 4 · 1370 Logatec, Slovenija