CompAir AXM

Compact modular desiccant dryers for reliable drying of compressed air in demanding industrial applications.

Pressure dew point: -40 °C / optionally -70 °C
Flow rate: 0.08 to 5.00 m³/min
Operating pressure: 4 to 14 bar(g)
Max. capacity: up to 300 m³/h
Pressure dew point: -40 °C / optionally -70 °C
Flow rate: 0.08 to 5.00 m³/min
Operating pressure: 4 to 14 bar(g)
Max. capacity: up to 300 m³/h
Standard equipment 6 · Options and accessories 6
  • Modular heatless desiccant designThe AXM series uses heatless regenerative desiccant technology (heatless PSA) to reliably remove moisture from compressed air and to provide an uninterrupted supply of dry air.
  • Pre-filter and after-filter as standardAll modular dryers are equipped as standard with a pre-filter and an after-filter for effective removal of particles, water and oil aerosols and for additional protection of the equipment downstream of the compressor.
  • Pressure dew point down to -40 °CStandard AXM versions provide an ISO Class 2 pressure dew point at -40 °C for most industrial applications that require high dry air quality.
  • Compact and flexible installationThe compact modular design allows an optimized layout; the connections are located at the rear and the piping can be routed from the left or the right side. Smaller models also allow wall or horizontal mounting.
  • Microprocessor or digital controlModels AX1M to AX4M include simple microprocessor control with an indication of the cycle and the active tower, while models AX7M to AX50M offer more advanced control with a long component service life.
  • Low noise and simple installationThe series includes regeneration air silencers with a noise level below 75 dBA, pressure gauges for a quick visual check, and feet designed for forklift handling on the larger models.
ParameterAX1MAX3MAX4MAX7MAX9MAX12MAX17MAX25MAX33MAX42MAX50M
Capacity [m³/min]0.080.250.420.670.921.171.672.503.334.175.00
Capacity [m³/h]51525405570100150200250300
Capacity [SCFM]39152432415988118147177
Max. pressure [bar(g)]1414141414141414141414
Max. pressure [psig]203203203203203203203203203203203
Pressure dew point [°C]-40-40-40-40-40-40-40-40-40-40-40
Air connection in/out [BSP (inch)]3/8"3/8"3/8"3/4"3/4"3/4"1"1"1 1/2"1 1/2"1 1/2"
Power supply [V/Ph/Hz]230/1/50-60230/1/50-60230/1/50-60230/1/50-60230/1/50-60230/1/50-60230/1/50-60230/1/50-60230/1/50-60230/1/50-60230/1/50-60
Width [mm]238238238475475475475475536536536
Depth [mm]212212212405405405405405495495495
Height [mm]42382310739681118131816731873170519051905
Weight [kg]1118274450607390177180188
Desiccant quantity per tower [kg]0.72.23.06.48.410.915.418.030.835.935.9

Benefits

High dry air quality

The AXM series provides an ISO Class 2 pressure dew point (-40 °C) and optionally also ISO Class 1 (-70 °C) for demanding applications. The pre-filter and after-filter fitted as standard additionally protect downstream equipment against particles, moisture and oil aerosols.

Reliable operation in industry

Proven heatless desiccant technology provides robust and reliable drying of compressed air. The extruded aluminum housing with anodizing and epoxy protection ensures a long service life even in more demanding conditions.

Low operating costs

AXM dryers are designed for a low total cost of ownership: a small pressure drop of around 0.2 bar, a point-of-use design that treats only the required amount of air, and the option of reducing regeneration air consumption according to the actual demand of the system.

Easy operation and monitoring

The user-friendly electronic controller gives a clear overview of dryer operation and, on larger models, also displays the status, alarms and service warnings. This simplifies monitoring of the unit and reduces the risk of unplanned downtime.

Compact and flexible design

The modular design saves space during installation, and the connections allow flexible piping from the left or the right side. Smaller models can also be mounted on a wall or horizontally, which makes them suitable for installation directly at the point of use.

Wide operating range and long service life

The AXM series covers operating pressures from 4 to 14 bar(g) and flow rates up to 300 m³/h. The longer 10-minute operating cycle, compared with many competing solutions, contributes to lower component wear and stable operation over time.

Automotive Industry

Automotive Industry

ISO 2–1

Reliable drying of compressed air for paint shops, pneumatic systems and production lines that require high air quality without moisture.

Pharmaceutical Industry

Pharmaceutical Industry

ISO 1

Extremely dry and clean air for critical processes where moisture control is essential for product quality and regulatory compliance.

Food Industry

Food Industry

ISO 1–2

Dry and oil-free air for food packaging, conveying and processing, where hygiene and product protection are essential.

Chemical Industry

Chemical Industry

Stable processes

Reliable moisture removal to protect processes, prevent condensation and ensure stable production conditions.

Oil & Gas

Oil & Gas

Robust operation

Highly reliable dryers for demanding environments that require consistent air quality and resistance to harsh operating conditions.

Air treatment

Describe your compressed air system and we will propose the right solution.

Fill in a short form and we will prepare an optimal solution for cooling, drying, filtration, and condensate removal.

Improved air quality
Condensate removal optimization
Complete system solution
Contact form
* required fields
Your message is sent directly to our email inbox.
Where to find us
Directions
Pod lipami 4 · 1370 Logatec, Slovenija

Similar devices

Explore other air treatment solutions.

CompAir CD-VS refrigerated air dryer

Compair CD-VS

Refrigerated air dryer

Variable-speed refrigerated dryers for maximum energy efficiency and a stable dew point. Inverter control adapts operation to the load and reduces energy consumption.

More about the device→
CompAir CDF-ES cycling refrigerated dryer

CompAir CDF-ES

Cycling refrigerated dryer

Cycling dryers for energy-efficient operation under variable loads. Automatic compressor shut-off, a stable +3 °C dew point (ISO Class 4) and a zero-loss condensate drain.

More about the device→
CompAir CD-Series refrigerated air dryer

CompAir CD

Refrigerated air dryer

Non-cycling refrigerated dryers for reliable and continuous drying. A stable +3 °C dew point (ISO Class 4), a low pressure drop and a robust design for long-term operation.

More about the device→
CompAir CDF-HP high-pressure refrigerated dryer

CompAir CDF-HP

High-pressure refrigerated dryer

High-pressure dryers up to 45 barg for demanding applications. A constant +3 °C dew point, a 3-in-1 stainless steel heat exchanger and reliable operation even at higher temperatures.

More about the device→
CompAir CMT-Series sub-zero refrigerated dryer

CompAir CMT

Sub-zero refrigerated dryer

Sub-zero dryers for a -20 °C dew point (ISO Class 3) with low operating costs. No purge losses and no consumables – the ideal solution for an efficient compromise.

More about the device→
CompAir AX-Series desiccant dryer

CompAir AX

Desiccant dryer

Heatless desiccant dryers for a very low dew point (-20 °C to -70 °C). A robust twin-tower design for reliable operation in demanding applications.

More about the device→
CompAir A-Series modular desiccant dryer

CompAir AXM

Modular desiccant dryer

Compact modular dryers for point-of-use applications. ISO Class 2 (-40 °C) or optionally Class 1 (-70 °C), with a low pressure drop and a small footprint.

More about the device→
CompAir AHB-Series heated blower desiccant dryer

CompAir AHB

Heated blower desiccant dryer

Dryers for high flow rates with a low dew point (-40 °C and below). Regeneration without compressed air consumption and EMS for low operating costs.

More about the device→