Maximum energy savings
The cycling dryer automatically adapts its operation to air consumption and switches the refrigerant compressor off when it is not needed, which significantly reduces energy consumption and operating costs.
CompAir CDF-ES
Cycling refrigeration dryers for compressed air, for energy-efficient drying, stable air quality and lower operating costs.
| Dryer type: Cycling refrigeration dryer |
| Air quality: ISO Class 4 (+3 °C PDP) |
| Flow rate: 0.9 to 125 m³/min |
| Refrigerant: R513A |
| Dryer type: Cycling refrigeration dryer |
| Air quality: ISO Class 4 (+3 °C PDP) |
| Flow rate: 0.9 to 125 m³/min |
| Refrigerant: R513A |
- Cycling refrigeration operating principleThe dryer works with a thermal mass that stores cooling energy, so the refrigerant compressor starts only when required, reducing energy consumption at part load.
- High-efficiency heat exchangerThe series uses an advanced aluminium heat exchanger with a low pressure drop, in a 3-layer version on the smaller models and a 2-layer version on the larger ones.
- No-loss Smart DrainThe electronic condensate drain is fitted as standard and removes condensate without any compressed air losses, only when it is needed.
- Glycol circuitThe built-in circulation pump keeps the glycol circulating whether the compressor is running or idle, which contributes to stable dryer operation.
- Microprocessor controlThe controller monitors the basic operating functions and provides a dew point display, temperature alarms, anti-freeze protection, condensate drain management and an alarm history.
- Energy saving displayThe series includes an energy saving display, which gives a better overview of how efficiently the dryer is operating.
- Anti-freeze protectionThe anti-freeze function protects the dryer against icing and contributes to reliable operation even under more demanding conditions.
- Remote alarm connectionAll models have a connection for a remote alarm signal, which allows easy integration into a monitoring or control system.
- Compact plug-and-play designThe units are designed for easy installation with single-point connections, which reduces installation time and commissioning costs.
- R513A refrigerantAll models use R513A refrigerant with a lower environmental impact, which supports current requirements for more sustainable operation.
| Parameter | CD9F-ES | CD12F-ES | CD18F-ES | CD24F-ES | CD30F-ES | CD40F-ES | CD50F-ES | CD60F-ES | CD80F-ES | CD100F-ES | CD130F-ES | CD160F-ES | CD216F-ES | CD250F-ES | CD300F-ES | CD375F-ES | CD430F-ES | CDA533F-ES | CDA700F-ES | CDA800F-ES | CDA900F-ES | CDA1100F-ES | CDA1250F-ES |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Air flow at +3 °C PDP [m³/min] | 0,90 | 1,20 | 1,80 | 2,40 | 3,00 | 4,00 | 5,00 | 6,00 | 8,00 | 10,00 | 13,00 | 15,83 | 21,67 | 25,00 | 30,00 | 37,50 | 43,33 | 53,33 | 70,00 | 80,00 | 90,00 | 110,00 | 125,00 |
| Absorbed power [kW] | 0,24 | 0,32 | 0,45 | 0,51 | 0,54 | 0,846 | 0,65 | 0,78 | 0,84 | 1,05 | 1,62 | 2,08 | 2,32 | 2,68 | 3,22 | 3,74 | 4,32 | 6,68 | 6,80 | 7,18 | 9,12 | 11,12 | 13,42 |
| Power supply | 230/1/50 | 230/1/50 | 230/1/50 | 230/1/50 | 230/1/50 | 230/1/50 | 230/1/50 | 230/1/50 | 230/1/50 | 230/1/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 | 400/3/50 |
| Pressure dew point [ISO Class] | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Maximum operating pressure [bar g] | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 16 | 13 | 13 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 14 | 13 | 13 | 13 |
| Air connection | 1/2" | 1/2" | 3/4" | 3/4" | 1" | 1" | 1 1/2" | 1 1/2" | 1 1/2" | 2" | 2" | 2" | 3" | 3" | 3" | 3" | 3" | DN150 PN16 | DN150 PN16 | DN150 PN16 | DN150 PN16 | DN200 PN16 | DN200 PN16 |
| Refrigerant | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A | R513A |
| Dimensions (W x D x H) [mm] | 386 x 500 x 651 | 386 x 500 x 651 | 386 x 500 x 651 | 386 x 500 x 651 | 423 x 567 x 771 | 423 x 567 x 771 | 500 x 718 x 980 | 500 x 718 x 980 | 500 x 718 x 980 | 779 x 720 x 1360 | 779 x 720 x 1360 | 779 x 720 x 1360 | 806 x 1012 x 1539 | 806 x 1012 x 1539 | 806 x 1012 x 1539 | 806 x 1012 x 1539 | 806 x 1012 x 1539 | 880 x 1819 x 1796 | 880 x 1819 x 1796 | 880 x 1819 x 1796 | 1140 x 2135 x 1910 | 1140 x 2135 x 1910 | 1140 x 2135 x 1910 |
| Weight [kg] | 39 | 43 | 48 | 51 | 67 | 71 | 105 | 108 | 120 | 186 | 227 | 237 | 394 | 394 | 394 | 399 | 399 | 810 | 840 | 840 | 1123 | 1152 | 1170 |
| Recommended filter | CF013 | CF013 | CF018 | CF025 | CF032 | CF067 | CF067 | CF067 | CF0100 | CF0100 | CF0133 | CF0167 | CF0260 | CF0260 | CF0305 | CF0383 | CF0450 | CF0700 | CF0700 | CF0950 | CF0950 | CF1250 | CF1250 |
Benefits
Environmentally friendly operation
The use of low-GWP R513A refrigerant together with reduced energy consumption means a smaller carbon footprint and compliance with the latest environmental standards.
Extremely low pressure drop
The optimised heat exchanger keeps the pressure drop below 0.2 bar, which reduces energy losses and increases the efficiency of the entire system.
Stable air quality
Reliably reaching ISO Class 4 (+3 °C pressure dew point) provides dry, clean air that protects equipment and keeps production processes stable.
Intelligent control and monitoring
The advanced controller provides operation monitoring, alarms, an event history and IoT readiness (iConn) for remote monitoring and preventive maintenance.
Reliable, simple operation
The robust design, automatic control and plug-and-play connection allow quick installation, minimal maintenance and a long service life.
No compressed air losses
The electronic no-loss Smart Drain removes condensate only when needed, without any loss of compressed air, which further reduces costs.
Compact, efficient design
The small footprint and the integrated system (heat exchanger + thermal mass) allow easy integration even in confined spaces.
Industrial Manufacturing
ISO 4Reliable compressed air drying for production processes in which equipment protection and stable operation of pneumatic systems are essential.
Food Industry
Clean airHigh-quality dry air for packaging, conveying and processing food, where hygiene and compliance with standards matter.
Pharmaceutical Industry
High standardsReliable moisture removal that protects sensitive processes and ensures constant compressed air quality.
Automotive Industry
Reliable operationDry compressed air for paint shops, tools and automated processes, where moisture can cause defects and additional costs.
Electronics
Moisture-freePrecisely controlled air quality for sensitive production processes in which moisture can damage components.
General Industry
Energy efficiencyAn optimal solution for all compressed air applications in which low operating costs and reliable drying matter.
Air treatment
Describe your compressed air system and we will propose the right solution.
Fill in a short form and we will prepare an optimal solution for cooling, drying, filtration, and condensate removal.
Improved air quality
Condensate removal optimization
Complete system solution
Where to find us
DirectionsPod lipami 4 · 1370 Logatec, Slovenija
Similar devices
Browse the other air treatment solutions as well.
Compair CD-VS
Refrigeration air dryerVariable speed refrigeration dryers for maximum energy efficiency and a stable dew point. Inverter control adapts operation to the load and reduces energy consumption.
More about the device→
CompAir CDF-ES
Cycling refrigeration dryerCycling dryers for energy-efficient operation under variable loads. Automatic compressor shut-off, a stable +3 °C dew point (ISO Class 4) and a zero-loss condensate drain.
More about the device→
CompAir CD
Refrigeration air dryerNon-cycling refrigeration dryers for reliable, continuous drying. A stable +3 °C dew point (ISO Class 4), low pressure drop and a robust design for a long service life.
More about the device→
CompAir CDF-HP
High-pressure refrigeration dryerHigh-pressure dryers up to 45 barg for demanding applications. A constant +3 °C dew point, a 3-in-1 stainless steel heat exchanger and reliable operation even at higher temperatures.
More about the device→
CompAir CMT
Sub-zero refrigeration dryerSub-zero dryers for a -20 °C dew point (ISO Class 3) with low operating costs. No purge losses and no consumables – an efficient compromise solution.
More about the device→
CompAir AX
Desiccant dryerHeatless desiccant dryers for very low dew points (-20 °C to -70 °C). A robust twin-tower design for reliable operation in demanding applications.
More about the device→
CompAir AXM
Modular desiccant dryerCompact modular dryers for point-of-use applications. ISO Class 2 (-40 °C) or optionally Class 1 (-70 °C) with a low pressure drop and a small footprint.
More about the device→
CompAir AHB
Heated blower desiccant dryerDryers for high flow rates with a low dew point (-40 °C and below). Regeneration without any compressed air consumption and EMS for low operating costs.
More about the device→