Aluminium construction
Die-cast aluminium cylinder and head with the intake filter in the head.
Balma MF15 and MS20 – direct-drive piston compressors
Compact direct-drive compressors with an aluminium cylinder and head, forced cooling and thermal protection – oil-free MF15 or oil-lubricated MS20.
| Motor power: 1.1–1.5 kW (1.5–2 HP) |
| Max. pressure: 8 / 10 bar |
| Intake volume: 160–220 l/min |
| Air receiver: 6 / 24 / 50 l |
| Lubrication: oil-free or oil-lubricated |
| Motor power: 1.1–1.5 kW (1.5–2 HP) |
| Max. pressure: 8 / 10 bar |
| Intake volume: 160–220 l/min |
| Air receiver: 6 / 24 / 50 l |
| Lubrication: oil-free or oil-lubricated |
- Aluminium cylinder and headDie-cast aluminium for low weight and good heat dissipation.
- Motor thermal protectionSwitches the motor off on overheating and resets automatically once it cools.
- Oversized crankcaseMore oil for lower temperature and longer pump life.
- Intake filter in the headThe intake filter is built straight into the cylinder head.
- Stainless steel reed valvesDurable stainless steel valves.
- Pressure regulator with gaugeSet the working pressure to suit the tool.
| Parameter | VENTO MF15 | MIZAR MS20 | SIRIO MS20 | ORION MS20 |
|---|---|---|---|---|
| Part number | 1129102640 | 1129100324 | 1129100311 | 1129100316 |
| Pump | MF15 | MS20 | MS20 | MS20 |
| Air receiver [l] | 6 | 6 | 24 | 50 |
| Version | stationary | stationary | on wheels | on wheels |
| Intake volume [l/min] | 160 | 220 | 220 | 220 |
| Power [HP / kW] | 1.5 / 1.1 | 2 / 1.5 | 2 / 1.5 | 2 / 1.5 |
| Speed [min⁻¹] | 2450 | 2850 | 2850 | 2850 |
| Power supply | 230 V 1~ 50 Hz | |||
| Max. pressure [bar] | 8 | 8 | 10 | 10 |
| Compression | single-stage | |||
| Lubrication | oil-free | oil-lubricated | oil-lubricated | oil-lubricated |
| Drive | direct | |||
| Dimensions (L × W × H) [mm] | 360 × 300 × 480 | 400 × 280 × 480 | 610 × 310 × 580 | 770 × 430 × 660 |
| Weight [kg] | 11 | 14 | 25 | 33 |
Benefits
Forced cooling and thermal protection
Low-current motor with self-resetting thermal protection.
Oil-lubricated or oil-free
VENTO MF15 is oil-free; MIZAR, SIRIO and ORION MS20 are oil-lubricated.
Light and portable
From 11 kg – easy to take with you.
Car repair workshops
Air toolsAir for impact wrenches, ratchets, blow guns and tyre inflation. The receiver covers short peaks in demand without a pressure drop.
Spray painting and finishing
SprayingSteady pressure and enough air for spray guns. For demanding finishes, add a dryer and fine air filtration.
Joinery and woodworking
Staplers and nailersFor staplers, nailers, pneumatic presses and dust blow-off. Low-speed belt-driven compressors handle a full working day.
Printing and graphics
Quiet and cleanAir for printing presses, laminators, heat presses and engraving. Quiet compressors can even run in an office or shop.
Compressors
Tell us your requirements and we will propose the right compressor.
Fill in a short form and we will prepare a configuration proposal.
Sizing based on actual consumption
Energy optimization
Installation and service
Where to find us
DirectionsPod lipami 4 · 1370 Logatec, Slovenija
Related piston compressors
Compare related Bambi, Worthington Creyssensac and Balma series.
Balma SOFFIO MX20
Oil-freeQuiet oil-free compressors, 1.5 kW, 9 bar, 62 dB(A), 6–50 l receiver.
More about the device→
Balma MV30
Oil-lubricated3 HP V-twin, 10 bar, 330 l/min, 20, 50 or 2 × 11 l receiver.
More about the device→
Bambi BB
Oil-lubricatedQuiet oil-lubricated compressors, 0.34–0.68 kW, 4–50 l receiver, from 54 dB(A).
More about the device→