Robust build
Aluminium heads, cast-iron cylinders, stainless steel reed valves and an oversized crankcase.
Balma NS12S – 2–3 HP belt-driven piston compressors
Belt-driven compressors for tradespeople and small businesses: aluminium heads, cast-iron cylinders, stainless steel reed valves and braked wheels.
| Motor power: 1.5–2.2 kW (2–3 HP) |
| Max. pressure: 10 bar |
| Intake volume: 255–320 l/min |
| Air receiver: 50–270 l |
| Power supply: 230 V 1~ or 400 V 3~ |
| Motor power: 1.5–2.2 kW (2–3 HP) |
| Max. pressure: 10 bar |
| Intake volume: 255–320 l/min |
| Air receiver: 50–270 l |
| Power supply: 230 V 1~ or 400 V 3~ |
- Aluminium headsHeads with large cooling fins for effective heat dissipation.
- Cast-iron cylindersWear-resistant for a long service life.
- Stainless steel reed valvesDurable stainless steel valves.
- Oversized crankcaseMore oil for lower temperature and longer pump life.
- Braked wheelsLarge rear wheels and braked swivel front wheels.
- Pressure switchStarts and stops the compressor automatically based on receiver pressure.
| Parameter | NS12S/50 CM2 | NS12S/50 CT2 | NS12S/100 CM2 | NS12S/100 CT2 | NS12S/100 CM3 | NS12S/100 CT3 | NS12S/150 CM2 | NS12S/150 CM3 | NS12S/200 CM3 | NS12S/270 CM3 |
|---|---|---|---|---|---|---|---|---|---|---|
| Part number | 4116028039 | 4116028041 | 4116028263 | 4116028267 | 4116028265 | 4116028270 | 4116028518 | 4116028519 | 4116028596 | 4116028727 |
| Pump | NS12S | |||||||||
| Air receiver [l] | 50 | 50 | 100 | 100 | 100 | 100 | 150 | 150 | 200 | 270 |
| Version | on wheels | |||||||||
| Intake volume [l/min] | 255 | 255 | 255 | 255 | 320 | 320 | 255 | 320 | 320 | 320 |
| Power [HP / kW] | 2 / 1.5 | 2 / 1.5 | 2 / 1.5 | 2 / 1.5 | 3 / 2.2 | 3 / 2.2 | 2 / 1.5 | 3 / 2.2 | 3 / 2.2 | 3 / 2.2 |
| Speed [min⁻¹] | 1075 | 1075 | 1075 | 1075 | 1300 | 1300 | 1075 | 1300 | 1300 | 1300 |
| Power supply | 230 V 1~ 50 Hz | 400 V 3~ 50 Hz | 230 V 1~ 50 Hz | 400 V 3~ 50 Hz | 230 V 1~ 50 Hz | 400 V 3~ 50 Hz | 230 V 1~ 50 Hz | 230 V 1~ 50 Hz | 230 V 1~ 50 Hz | 230 V 1~ 50 Hz |
| Max. pressure [bar] | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
| Compression | single-stage | |||||||||
| Lubrication | oil-lubricated | |||||||||
| Drive | belt | |||||||||
| Dimensions (L × W × H) [mm] | 911 × 422 × 843 | 911 × 422 × 843 | 1078 × 534 × 858 | 1078 × 502 × 930 | 1078 × 502 × 930 | 1078 × 502 × 930 | 1346 × 500 × 915 | 1346 × 500 × 916 | 1409 × 572 × 965 | 1495 × 588 × 1017 |
| Weight [kg] | 45 | 52 | 55 | 63 | 65 | 65 | 70 | 87 | 88 | 120 |
Benefits
Belt drive
The pump turns slower than the motor: less wear, lower temperature and quieter operation.
Easy to move
Rubber rear wheels and braked front wheels.
230 V or 400 V
Single-phase versions for workshops without a three-phase supply, three-phase for heavier duty.
Car repair workshops
Air toolsAir for impact wrenches, ratchets, blow guns and tyre inflation. The receiver covers short peaks in demand without a pressure drop.
Joinery and woodworking
Staplers and nailersFor staplers, nailers, pneumatic presses and dust blow-off. Low-speed belt-driven compressors handle a full working day.
Spray painting and finishing
SprayingSteady pressure and enough air for spray guns. For demanding finishes, add a dryer and fine air filtration.
Metalworking
ProductionWorking and control air for machines, fixtures, pneumatic cylinders and blow-off. Two-stage compressors deliver more air at higher pressure.
Compressors
Tell us your requirements and we will propose the right compressor.
Fill in a short form and we will prepare a configuration proposal.
Sizing based on actual consumption
Energy optimization
Installation and service
Where to find us
DirectionsPod lipami 4 · 1370 Logatec, Slovenija
Related piston compressors
Compare related Bambi, Worthington Creyssensac and Balma series.
Balma NS19S
Oil-lubricatedBelt-driven compressors, 3–4 HP, 10 bar, up to 486 l/min, 50–270 l receiver.
More about the device→
Worthington Creyssensac DIXAIR
Oil-lubricatedBelt-driven compressors, 2–5.5 HP, 10 bar, 50–270 l receiver, for occasional use.
More about the device→
Balma FELP SILENT
Oil-lubricatedQuiet enclosed compressors, 2–10 HP, up to 11 bar, on a base or receiver, also with dryer.
More about the device→