For occasional use
DIXAIR is a reliable compressor for DIY users and small workshops that need air from time to time.
Worthington DIXAIR – belt-driven piston compressors
A reliable belt-driven compressor for occasional use: a proven pump, pressure reducer with gauge, anti-vibration pads and a compact, lightweight design.
| Motor power: 1.5–4.1 kW (2–5.5 HP) |
| Max. pressure: 10–11 bar |
| Intake volume: 255–595 l/min |
| Air receiver: 50 / 90 / 200 / 270 l |
| Drive: belt |
| Motor power: 1.5–4.1 kW (2–5.5 HP) |
| Max. pressure: 10–11 bar |
| Intake volume: 255–595 l/min |
| Air receiver: 50 / 90 / 200 / 270 l |
| Drive: belt |
- Pressure reducer with gaugeSet the outlet pressure easily and safely.
- Pressure switchStarts and stops the compressor automatically based on receiver pressure.
- Anti-vibration padsPads under the front feet improve stability and reduce noise.
- Plastic belt guardCovers all moving parts and protects the user.
- Long aftercooler pipeBetter cooling of the air before it enters the receiver.
- Wheels and handleMove the compressor easily to wherever you need it.
| Parameter | DNX 2050 MONO | DNX 2100 MONO | DNX 3100 MONO | DNX 3100 TRI | DNX 3200 MONO | DNX 3200 TRI | DNX 4200 | DNX 4300 | DNX 5200 | DNX 5300 |
|---|---|---|---|---|---|---|---|---|---|---|
| Pump | NS12S | NS12S | NS12S | NS12S | NS12S | NS12S | NS19S | NS19S | NS31S | NS31S |
| Air receiver [l] | 50 | 90 | 90 | 90 | 200 | 200 | 200 | 270 | 200 | 270 |
| Intake volume [l/min] | 255 | 255 | 320 | 320 | 320 | 320 | 486 | 486 | 595 | 595 |
| Power [HP / kW] | 2 / 1.5 | 2 / 1.5 | 3 / 2.2 | 3 / 2.2 | 3 / 2.2 | 3 / 2.2 | 4 / 3 | 4 / 3 | 5.5 / 4.1 | 5.5 / 4.1 |
| Speed [min⁻¹] | 1075 | 1075 | 1300 | 1300 | 1300 | 1300 | 1300 | 1300 | 1400 | 1400 |
| Power supply | 230 V 1~ 50 Hz | 230 V 1~ 50 Hz | 230 V 1~ 50 Hz | 400 V 3~ 50 Hz | 230 V 1~ 50 Hz | 400 V 3~ 50 Hz | 400 V 3~ 50 Hz | 400 V 3~ 50 Hz | 400 V 3~ 50 Hz | 400 V 3~ 50 Hz |
| Max. pressure [bar] | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 11 | 11 |
| Compression | single-stage | single-stage | single-stage | single-stage | single-stage | single-stage | single-stage | single-stage | two-stage | two-stage |
| Lubrication | oil-lubricated | |||||||||
| Drive | belt | |||||||||
| Starting | direct-on-line | |||||||||
| Sound pressure (4 m) [dB(A)] | 73 | 73 | 75 | 75 | 75 | 75 | 76 | 76 | 75 | 75 |
| Dimensions (L × W × H) [mm] | 853 × 398 × 734 | 982 × 502 × 852 | 982 × 502 × 853 | 982 × 502 × 853 | 1413 × 572 × 946 | 1413 × 572 × 946 | 1450 × 572 × 1008 | 1495 × 456 × 994 | 1413 × 572 × 1023 | 1495 × 456 × 1009 |
| Weight [kg] | 52 | 65 | 65 | 65 | 95 | 95 | 129 | 121 | 125 | 191 |
Benefits
Proven belt-driven pump
Single-stage belt-driven pump for a long service life.
Easy to use
Pressure reducer with gauge for safe setting of the outlet pressure.
Compact and light
Small receiver, wheels and handle – the compressor is easy to move.
Car repair workshops
Air toolsAir for impact wrenches, ratchets, blow guns and tyre inflation. The receiver covers short peaks in demand without a pressure drop.
Joinery and woodworking
Staplers and nailersFor staplers, nailers, pneumatic presses and dust blow-off. Low-speed belt-driven compressors handle a full working day.
Spray painting and finishing
SprayingSteady pressure and enough air for spray guns. For demanding finishes, add a dryer and fine air filtration.
Tyre services
Tyre inflationFitting and inflating car and van tyres. For truck and tractor tyres, choose a two-stage compressor rated up to 15 bar.
Compressors
Tell us your requirements and we will propose the right compressor.
Fill in a short form and we will prepare a configuration proposal.
Sizing based on actual consumption
Energy optimization
Installation and service
Where to find us
DirectionsPod lipami 4 · 1370 Logatec, Slovenija
Related piston compressors
Compare related Bambi, Worthington Creyssensac and Balma series.
Worthington Creyssensac DIXAIR PRO
Oil-lubricatedProfessional belt-driven compressors, 2–3 HP, 10 bar, 50–200 l receiver.
More about the device→
Balma NS12S
Oil-lubricatedBelt-driven compressors, 2–3 HP, 10 bar, 255–320 l/min, 50–270 l receiver.
More about the device→
Balma MV30
Oil-lubricated3 HP V-twin, 10 bar, 330 l/min, 20, 50 or 2 × 11 l receiver.
More about the device→