For professional workshops
Reliable, simple to use and pleasantly quiet – ideal for smaller workshops.
Worthington DIXAIR PRO – workshop compressors
A versatile professional compressor for smaller workshops – reliable, simple to use and pleasantly quiet, with a cast-iron cylinder and a low-speed pump.
| Motor power: 1.5–2.2 kW (2–3 HP) |
| Max. pressure: 10 bar |
| Intake volume: 255–393 l/min |
| Air receiver: 50 / 90 / 150 / 200 l |
| Drive: belt, low speed |
| Motor power: 1.5–2.2 kW (2–3 HP) |
| Max. pressure: 10 bar |
| Intake volume: 255–393 l/min |
| Air receiver: 50 / 90 / 150 / 200 l |
| Drive: belt, low speed |
- Condensate separator with quick couplingOutlet with built-in condensate separator and quick coupling.
- Metal belt guardA robust guard covers all moving parts.
- Cast-iron cylindersWear-resistant for a long service life.
- Easy oil checkQuick oil level check and easy topping up.
- Large fanFor effective cooling of the pump and motor.
- Pressure switchStarts and stops the compressor automatically based on receiver pressure.
| Parameter | DNXPRO 2100 MONO | DNXPRO 2100 TRI | DNXPRO 250 MONO | DNXPRO 250 TRI | DNXPRO 3100 MONO | DNXPRO 3100 TRI | DNXPRO 3200 MONO | DNXPRO 3200 TRI | DNXPRO 350 MONO | DNXPRO 350 TRI | DNXPRO 3150V |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Pump | NS12S | NS12S | NS12S | NS12S | NS19S | NS19S | NS19S | NS19S | NS19S | NS19S | NS19S |
| Air receiver [l] | 90 | 90 | 50 | 50 | 90 | 90 | 200 | 200 | 50 | 50 | 150 |
| Intake volume [l/min] | 255 | 255 | 255 | 255 | 393 | 393 | 393 | 393 | 393 | 393 | 393 |
| Power [HP / kW] | 2 / 1.5 | 2 / 1.5 | 2 / 1.5 | 2 / 1.5 | 3 / 2.2 | 3 / 2.2 | 3 / 2.2 | 3 / 2.2 | 3 / 2.2 | 3 / 2.2 | 3 / 2.2 |
| Speed [min⁻¹] | 1075 | 1075 | 1075 | 1075 | 1050 | 1050 | 1050 | 1050 | 1050 | 1050 | 1050 |
| Power supply | 230 V 1~ 50 Hz | 400 V 3~ 50 Hz | 230 V 1~ 50 Hz | 400 V 3~ 50 Hz | 230 V 1~ 50 Hz | 400 V 3~ 50 Hz | 230 V 1~ 50 Hz | 400 V 3~ 50 Hz | 230 V 1~ 50 Hz | 400 V 3~ 50 Hz | 230 V 1~ 50 Hz |
| Max. pressure [bar] | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
| Compression | single-stage | ||||||||||
| Lubrication | oil-lubricated | ||||||||||
| Drive | belt | ||||||||||
| Starting | direct-on-line | ||||||||||
| Sound pressure (4 m) [dB(A)] | 73 | 73 | 73 | 73 | 75 | 75 | 75 | 75 | 75 | 75 | 75 |
| Dimensions (L × W × H) [mm] | 1078 × 502 × 853 | 1078 × 502 × 930 | 911 × 387 × 806 | 911 × 387 × 806 | 1123 × 502 × 930 | 1123 × 502 × 930 | 1423 × 572 × 1027 | 1423 × 572 × 1027 | 989 × 395 × 806 | 989 × 390 × 806 | 811 × 644 × 1699 |
| Weight [kg] | 63 | 63 | 52 | 52 | 72 | 67 | 129 | 129 | 56 | 56 | 120 |
Benefits
Cast-iron cylinder, low speed
A durable low-speed pump with easy oil level check and topping up.
Clean air at the outlet
Outlet with built-in condensate separator and quick coupling.
Mobile up to 200 litres
Mobile versions up to 200 l or vertical to save space; single-phase or three-phase motor.
Car repair workshops
Air toolsAir for impact wrenches, ratchets, blow guns and tyre inflation. The receiver covers short peaks in demand without a pressure drop.
Tyre services
Tyre inflationFitting and inflating car and van tyres. For truck and tractor tyres, choose a two-stage compressor rated up to 15 bar.
Spray painting and finishing
SprayingSteady pressure and enough air for spray guns. For demanding finishes, add a dryer and fine air filtration.
Joinery and woodworking
Staplers and nailersFor staplers, nailers, pneumatic presses and dust blow-off. Low-speed belt-driven compressors handle a full working day.
Compressors
Tell us your requirements and we will propose the right compressor.
Fill in a short form and we will prepare a configuration proposal.
Sizing based on actual consumption
Energy optimization
Installation and service
Where to find us
DirectionsPod lipami 4 · 1370 Logatec, Slovenija
Related piston compressors
Compare related Bambi, Worthington Creyssensac and Balma series.
Worthington Creyssensac DIXAIR PRO 11/15 bar
Oil-lubricatedTwo-stage compressors, 3–10 HP, for 11 or 15 bar, 90–500 l receiver.
More about the device→
Worthington Creyssensac DIXAIR
Oil-lubricatedBelt-driven compressors, 2–5.5 HP, 10 bar, 50–270 l receiver, for occasional use.
More about the device→
Balma NS19S
Oil-lubricatedBelt-driven compressors, 3–4 HP, 10 bar, up to 486 l/min, 50–270 l receiver.
More about the device→