Evaporator-in-Tank Design
A dedicated process cooling design provides high flow rates with low pressure losses while ensuring reliable operation even when using process fluids with a higher level of contamination.
MTA TAEevo Tech
Air-cooled process chillers with scroll compressors – a compact solution featuring an integrated water tank and pump for reliable industrial cooling.
| Nominal cooling capacity: 8–259 kW |
| Power supply: 400 ±10 % / 3-PE / 50 Hz |
| Refrigerant: R410A |
| EER: up to 2.83 (12/7 °C; 35 °C) / up to 4.50 (20/15 °C; 25 °C) |
| Operating mode: Cooling |
| Heat exchanger: Evaporator – finned coil inside the water tank |
| Fan: Axial, centrifugal, or EC (depending on model) |
| Nominal cooling capacity: 8–259 kW |
| Power supply: 400 ±10 % / 3-PE / 50 Hz |
| Refrigerant: R410A |
| EER: up to 2.83 (12/7 °C; 35 °C) / up to 4.50 (20/15 °C; 25 °C) |
| Operating mode: Cooling |
| Heat exchanger: Evaporator – finned coil inside the water tank |
| Fan: Axial, centrifugal, or EC (depending on model) |
- R410A RefrigerantThe high-efficiency R410A refrigerant provides excellent cooling performance and efficient heat transfer for process cooling applications.
- Hermetic Scroll CompressorsHermetically sealed scroll compressors ensure high efficiency, reliable operation, and long service life even under demanding industrial conditions.
- Evaporator-in-TankA high-efficiency evaporator with copper tubes and aluminum fins is installed directly inside the hydraulic tank, ensuring stable process fluid temperatures and minimal heat losses.
- Air-Cooled CondensersOversized condensers with copper tubes and aluminum fins provide efficient heat rejection. From model 031 onwards, an air filter is also included as standard.
- Axial FansHigh-efficiency axial fans with galvanized steel or aluminum-plastic sickle-shaped blades provide optimum airflow while maintaining low noise levels.
- Integrated Hydraulic TankThe integrated water tank, rated for a design pressure of 6 barg, includes filling and drain valves as well as a pressure gauge for stable cooling system operation.
- IC208CX Microprocessor ControllerThe advanced parametric controller provides precise operation control, diagnostics, system protection, and integration with supervisory control systems.
- Comprehensive Safety FeaturesIncludes phase monitoring, high- and low-pressure switches, conductivity-based level sensor, crankcase heater, and an internal hydraulic bypass.
- IP54 / IP44 Electrical ProtectionThe electrical enclosure is rated IP54 (models 031–1002) or IP44 (model 020), making the unit suitable for outdoor installation.
| Parameter | 020 | 031 | 051 | 081 | 101 | 121 | 161 | 201 | 251 | 301 | 351 | 381 | 401 | 402 | 502 | 602 | 702 | 802 | 902 | 1002 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nominal Cooling Capacity (1) [kW] | 5,66 | 9,01 | 13,06 | 21,97 | 26,73 | 34,54 | 37,83 | 43,32 | 48,56 | 57,74 | 65,13 | 78,87 | 87,66 | 87,65 | 102,27 | 112,97 | 132,7 | 154,66 | 173,71 | 195,21 |
| Total Power Input (1) [kW] | 2,26 | 3,45 | 5 | 8,04 | 9,67 | 12,73 | 14,6 | 16,44 | 19,99 | 21,67 | 27,64 | 27,86 | 32 | 33,21 | 38,26 | 43,96 | 49,27 | 57,13 | 65,13 | 70,59 |
| EER (1) | 2,51 | 2,62 | 2,61 | 2,73 | 2,77 | 2,71 | 2,59 | 2,63 | 2,43 | 2,66 | 2,36 | 2,83 | 2,74 | 2,64 | 2,67 | 2,57 | 2,69 | 2,71 | 2,67 | 2,77 |
| SEPR HT (2) | 5,04 | 5,09 | 5,23 | 5,07 | 5,02 | 5,03 | 5,04 | 5,38 | 5,34 | 5,1 | 5,13 | 5,26 | 5,17 | 5,32 | 5,53 | 5,37 | 5,31 | 5,59 | 5,37 | 5,46 |
| SEPR MT (3) | 2,74 | 2,95 | 3,18 | 3,46 | 3,37 | 3,27 | 3,31 | 3,43 | 3,67 | 3,47 | 3,31 | 3,3 | 3,29 | 3,61 | 3,99 | 3,77 | 3,63 | 3,73 | 3,69 | 3,91 |
| Nominal Cooling Capacity (4) [kW] | 8,1 | 12,82 | 18,38 | 30,05 | 36,36 | 47,25 | 51,58 | 59,2 | 66,82 | 79,38 | 89,11 | 109,86 | 122 | 120,91 | 141,99 | 157,05 | 179,46 | 207,88 | 231,81 | 259,06 |
| Total Power Input (4) [kW] | 1,9 | 2,96 | 4,34 | 7,23 | 8,58 | 11,38 | 12,95 | 14,84 | 17,92 | 19,11 | 24,45 | 24,44 | 28,89 | 30,16 | 34,41 | 39,19 | 43,05 | 50,43 | 57,62 | 62,73 |
| EER (4) | 4,26 | 4,33 | 4,24 | 4,15 | 4,23 | 4,15 | 3,98 | 3,99 | 3,73 | 4,15 | 3,64 | 4,5 | 4,22 | 4,01 | 4,13 | 4,01 | 4,17 | 4,12 | 4,02 | 4,13 |
| Power Supply [V / Ph / Hz] | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 | 400 ±10 % / 3-PE / 50 |
| Sound Power Level (50 Hz) (5) [dB(A)] | 80,4 | 81,1 | 81,1 | 81,6 | 82,1 | 82,1 | 83,0 | 84,3 | 84,3 | 86,0 | 86,0 | 88,3 | 89,7 | 89,5 | 89,5 | 89,5 | 90,2 | 90,6 | 91,7 | 92,8 |
| Width [mm] | 560 | 660 | 660 | 761 | 761 | 761 | 761 | 866 | 866 | 866 | 866 | 1150 | 1150 | 1255 | 1255 | 1255 | 1250 | 1250 | 1250 | 1250 |
| Depth [mm] | 1284 | 1315 | 1315 | 1862 | 1862 | 1862 | 1862 | 2250 | 2250 | 2250 | 2250 | 2790 | 2790 | 3298 | 3298 | 3298 | 3535 | 3535 | 4655 | 4655 |
| Height [mm] | 795 | 1373 | 1373 | 1437 | 1437 | 1437 | 1437 | 2054 | 2054 | 2054 | 2054 | 2090 | 2090 | 2119 | 2119 | 2119 | 2151 | 2151 | 2155 | 2155 |
| Operating Weight (6) [kg] | 199 | 314 | 324 | 462 | 624 | 635 | 649 | 924 | 966 | 1018 | 1028 | 1366 | 1419 | 1666 | 1682 | 1726 | 2077 | 2114 | 2839 | 2936 |
| Tank Volume [l] | 60 | 115 | 115 | 140 | 255 | 255 | 255 | 350 | 350 | 350 | 350 | 410 | 410 | 500 | 500 | 500 | 678 | 678 | 950 | 950 |
| Evaporator Water Connections [Rp / DN] | 3/4" | 1" | 1" | 1 1/2" | 1 1/2" | 1 1/2" | 1 1/2" | 2" | 2" | 2" | 2" | 2 1/2" | 2 1/2" | 2 1/2" | 2 1/2" | 2 1/2" | 3" | 3" | DN100 | DN100 |
Why choose MTA TAEevo Tech?
High-Efficiency Scroll Compressors
Hermetically sealed scroll compressors deliver outstanding efficiency, reliable operation, low noise levels, and a long service life.
Wide Operating Range
Supports inlet water temperatures up to +35 °C, outlet temperatures down to −10 °C, and ambient temperatures from −5 °C to +46 °C.
ErP Tier 2 Compliance
All models comply with ErP Tier 2 requirements for both SEPR HT and SEPR MT, ensuring excellent seasonal energy efficiency.
R410A Refrigerant
R410A refrigerant provides high cooling performance thanks to its excellent thermal conductivity and efficient heat transfer characteristics.
Large Integrated Water Tank
The standard integrated hydraulic tank stabilizes the system during rapid load changes and ensures a consistent process fluid temperature.
Suitable for Outdoor Installation
The IP54 or IP44 electrical enclosure ensures reliable operation even when installed outdoors or in demanding industrial environments.
Extensive Configuration Options
A comprehensive range of optional equipment and accessory kits allows the unit to be tailored to the specific requirements of virtually any industrial application.
Suitable for Open and Pressurized Hydraulic Systems
The unit is designed for both atmospheric and pressurized hydraulic systems up to 6 barg, making it suitable for a wide range of industrial cooling applications.
Comprehensive Safety Protection
Integrated phase monitoring, pressure switches, antifreeze protection, level sensors, crankcase heater, and an internal hydraulic bypass ensure safe and stable operation.
Plastics Industry
Process CoolingAccurate and reliable cooling of molds, extruders, and injection molding machines ensures consistent product quality, shorter production cycles, and higher productivity.
Automotive Industry
High ReliabilityStable process cooling for production lines, testing stations, and manufacturing processes ensures high product quality and reliable equipment operation.
Chemical & Pharmaceutical Industry
Temperature StabilityReliable temperature control of process fluids for chemical and pharmaceutical applications where precision and safety are essential.
Food Industry
Process HygieneCooling of food production processes ensures consistent product quality, repeatable production results, and compliance with stringent hygiene requirements.
Laser Systems
Precision CoolingPrecise cooling of laser sources and optical components ensures stable performance, extended equipment life, and superior laser processing quality.
Machine Tools
Reliable OperationCooling of spindles, emulsions, and hydraulic systems improves machining accuracy, extends machine life, and reduces downtime.
Winemaking
Fermentation ControlPrecise temperature control during wine fermentation and storage preserves quality, aroma, and process consistency.
Industrial cooling
Describe your process and we will propose the right solution.
Fill in a short form and we will prepare a configuration proposal based on load profile, environment, and energy efficiency goals.
Sizing based on real operating loads
Energy consumption optimization
Supply, installation, and service
Where to find us
DirectionsPod lipami 4 · 1370 Logatec, Slovenija
Related Products
Explore the complete range of MTA process chillers – from compact solutions for smaller machines to high-capacity systems for demanding industrial process cooling applications.
TAE N MINI
Compact R290 ChillerCompact industrial chiller using natural R290 refrigerant for precise and reliable cooling of small process applications. It combines high efficiency, robust construction, and simple operation and maintenance.
Learn More→
TAEevo Tech MINI
Mini Process ChillerCompact air-cooled process chiller for water and glycol mixtures. Its minimal footprint, non-ferrous hydraulic circuit, and in-tank evaporator ensure stable process fluid temperatures and reliable operation.
Learn More→
TAE G Compact
Compact Process SolutionCompact industrial chiller with an integrated hydraulic module and non-ferrous water circuit. Ideal for installation next to machinery or in technical rooms where space is limited.
Learn More→
TAEevo Tech
Proven Process ChillerAir-cooled process chiller with an integrated tank and pump. The in-tank evaporator provides high flow rates, low pressure drops, and stable process temperatures even under varying loads.
Learn More→
TAE G
Highly Versatile Process ChillerAir-cooled industrial process chiller for demanding applications. The integrated pump and tank ensure quick installation, while low-GWP refrigerants provide efficient and sustainable operation.
Learn More→
TAEevo LWT
Low Temperature ChillerSpecialized air-cooled process chiller designed for cooling glycol mixtures down to −24 °C. Ideal for applications requiring stable low temperatures and reliable continuous operation.
Learn More→
CYGNUS G
Sustainable Industrial ChillerAir-cooled process chiller with scroll compressors and low-GWP R454B refrigerant. The plug-and-play design with an integrated tank and one or two pumps makes it easy to adapt to a wide range of industrial processes.
Learn More→
ARIES G FC
Integrated Free CoolingHigh-performance process chiller with an integrated free-cooling system. At low ambient temperatures, it reduces compressor operation, energy consumption, and wear on the refrigeration system.
Learn More→
NEPTUNE G
High-Capacity Water-CooledWater-cooled chiller with scroll compressors for medium and large industrial process cooling systems. Its compact footprint, R454B refrigerant, and excellent part-load efficiency make it ideal for demanding technical installations.
Learn More→
TWEevo Tech
Water-Cooled Process ChillerCompact water-cooled process chiller with an integrated tank and pump. The in-tank evaporator design ensures low pressure drops, stable process temperatures, and dependable industrial performance.
Learn More→